The classic everyday bottle Eddy+ made even better with 50% recycled material and a colour-matched thumb tab. Lightweight, durable, and dependable hydration.
Breathing new life into plastic waste is harder than it seems. Much of what’s recycled ends up in landfills and incinerators or is mechanically chipped and recycled into new products that don’t always have the durability needed for daily use. There is science in the solution. Polyester Renewal Technology (PRT) is more efficient than mechanical recycling and produces new material that is made with 50% recycled content.
Less virgin plastic needed for new products means saving precious environmental resources. Tritan Renew is highly durable, dishwasher safe, and free of BPA, BPS, and BPF chemicals. CamelBak reusable bottles made better.
Features:
- Hydration Capacity - 1 Litre
- Made with 50% recycled material
- Flip, bite, sip - drink through straw
- Leak-proof when closed, spill-proof when open
- Easy to carry - comfortable carry handle
- Odour and stain resistant
- Easy to clean - cap and vessel dishwasher safe
- Drink clean - BPA, BPS and BPF free
- Universal cap system - compatible with Chute Mag, Carry Cap and Pak Cap
CamelBak Got Your Bak Guarantee: If we built it, we'll Bak it with our lifetime guarantee
CLEANING THE EDDY+
The bottle, bite valve, straw and lid can be cleaned in the top rack of the dishwasher or by hand with warm, soapy water. Pull off the bite valve and straw from the cap. If you like to use a bottle brush, we don’t recommend forcing a brush through the Bite Valve slit. If you have the brush kit, run the small brush through the straw.
For a deeper cleaning, add a drop of mild soap or tablespoon of bleach to a clean glass jar filled with water. Drop the bite valve, straw and cap into the solution, and tightly close the jar’s lid. Shake the mixture around for 30 seconds, and then let the parts soak for about 15 minutes. Rinse and shake dry.
To re-assemble the lid
Flip the stem collar (the component the bite valve attached to originally) to the open position. Orient the bite valve so the finger tab points towards the front of the cap. Push the bite valve firmly onto the stem collar.
Press the straw back into place on the bottom of the lid. Ensure the straw covers the notches completely.
What is BPA?
Bisphenol-A is an ingredient used to make polycarbonate. In recent years, there has been increasing consumer demand for a bottle that is not made with Bisphenol-A (BPA), and CamelBak is proud to offer BPA-free bottles with the same great properties customers have come to expect from polycarbonate: vibrant colour, clarity, durability, dishwasher-safe, and with no residual taste. The entire CamelBak bottle line is now available in BPA-Free materials.
Can I use with carbonated beverages?
You can use any beverage in the CamelBak eddy+, however we do not recommend the use of carbonated beverages with the straw configuration because pressure can force liquid out through the straw. To use with carbonated beverages, we recommend that you remove the straw and drink via “tip and sip.”
How do I clean the CamelBak eddy+ with bite valve?
First pull off the bite valve and the straw from the cap. You can clean your bottle by hand or in the top rack of the dishwasher. For cleaning by hand, you can soak all parts in warm soapy water.
First-time use: What’s the clear thing on top of the cap for? Do I remove it or cut it to drink?
The clear thing is the CamelBak Big Bite Valve. This patented feature provides easy drinking and spill-proof safety. Do NOT remove or cut this piece to drink. Simply bite it slightly and sip as you would out of a straw.
Can/How do I freeze the CamelBak eddy+ with bite valve?
You can freeze the bottle but make sure:
1. The bottle is not completely full when you do this (we recommend only 3/4 full to allow for expansion of the water as it freezes to ice). 2. The bottle is right side up
We also recommend that the bite valve stem NOT be flipped up or down if there is any frozen water in the tube. Wait until thawed.
Can I use the CamelBak eddy in high-altitude/ low-pressure environments (i.e. airplanes, mountain altitudes, etc)?
Yes, but with special care because pressure can force liquid out through the straw. Keep the bottle right side up with the bite valve in the closed position. Remove the straw for additional protection. Expect a bit of “spurt” during the first sip. You may also twist the cap open to release any pressure and then close before your first sip.
Can I put hot liquids in it?
We do not recommend using with hot drinks because the experience will be similar to drinking hot liquid through a straw.
How do I know if my bottle is BPA-Free?
The BPA-Free logo will be molded on the base of the CamelBak eddy+. All CamelBak bottles are BPA-free.
What happens if I put sports drinks/juice in the CamelBak eddy+?
Use of any of these drinks in the bottle is fine, but thorough cleaning after each use is recommended.
Does this new BPA-free eddy+ leach any chemicals? What type of safety testing has been done on the new Bottle?
After rigorous 3rd party testing of the BPA-free eddy, no harmful chemicals have been detected to come in contact with, or leach into food/beverage surfaces. A FCN (Food Contact Substance Notification) notice #729 declared that Tritan is safe and meets all EPA and FDA guidelines for material that is to come in repeated contact with food. In addition, we have verified that all materials used in the bottle including Tritan meet the stringent guidelines set by California Proposition 65. Extraction tests were completed by independent 3rd party researchers, verifying that the new material meets all requirements as set forth by organisations such as:
- FDA food safety standards
- European Community food safety standards
- Japanese Ministry of Health and Welfare
- California Prop 65
What max temperature (freezing/boiling water) can the CamelBak eddy+ withstand?
The CamelBak eddy+ can withstand being filled with boiling water or stored in below freezing temperatures. We do not recommend boiling the bottle itself. Is the CamelBak eddy+ microwave safe?
Feel free to use the CamelBak eddy+ to warm up liquids (ie. up to a minute), but we don’t recommend cooking your dinner in it. Do NOT microwave with the cap in place as it contains metal screws that are not microwave safe.
Does the CamelBak eddy+ work with back country purifier filters/microfilters?
The CamelBak eddy+ is compatible with filters that adapt to a 63 mm screw top opening (in other words, it’s compatible with most filters on the market).
Does it hold residual taste?
No, there is no residual taste in the bottle materials, and it’s also stain-resistant. Some sports drinks and other flavoured beverages can leave behind residue of flavour oils that could require extra cleaning.
What happens if I take the straw off?
Removal of the straw allows a “tip and sip” mode of drinking.
The Big Bite Valve is made of Medical-Grade Silicone – for long life and taste-free performance.