Camelbak ArmorBak 3L Mil Spec Crux Hydration Pack

The ArmorBak is specifically designed to attach directly to the back of an IOTV, MTV or plate carrier with the CAMELBAK Direct Armor Attachment System (D.A.A.S.). The system eliminates the need for shoulder straps and minimises side-to-side movement. The D.A.A.S. system also enables the user to pressurise the included 3L, 100oz Mil Spec Crux Reservoir for rinsing equipment in the field.

**PLEASE NOTE : Tactical vest in image is for display purpose only**

Features:

• D.A.A.S. (Direct Armor Attachment System) quick release buckles allow for a one-time set up and rapid attachment/removal from any plate carrier with MOLLE

• D.A.A.S. Quick Attach Pressure Strap increases stability and makes on-the-move hydration, rinsing glasses and goggles easier

• Dual zippers for quick reservoir removal and easy refill

• 5 mm closed-cell foam on front and back panels for insulation

• Infra-red compliant fabric, buckles and webbing

• Add or remove name tags and unit badges quickly with integrated hook-and-loop

• Uses 500D Double-rip Cordura Fabric for the ultimate combination of strength and durability

• Gear Capacity: 3.0 L / 183 cu in

CamelBak Got Your Bak Guarantee: If we built it, we'll Bak it with our lifetime guarantee.

PACK CLEANING

We recommend wiping your pack with a damp cloth to remove dirt. If the pack is extremely dirty and needs a deeper cleaning, soak it in cool or warm water with a very mild soap. Rinse the pack thoroughly with cool water. If soap residue remains in the fabric, it may create suds if exposed to water or sweat.

DO NOT wash your pack in a washing machine. Machine washing may damage the pack or affect the integrity of the fabric and fasteners, and will void the Got Your Bak™ Guarantee.

RESERVOIR CLEANING

The best way to care for your reservoir is to clean and dry it after every use, especially if you fill the reservoir with anything other than water. However, if a reservoir has not been cleaned after every use, and mold or discoloration develops:

Use hot water and a CamelBak Cleaning Tablet. (Or use 2 tablespoons of baking soda or bleach instead of CamelBak Cleaning Tab.) Mix the solution inside your reservoir and elevate the reservoir above the tube and Big Bite Valve. Pinch the bite valve, allowing the solution to flow into the drink tube and fill the bite valve.
Let the reservoir and cleaning solution sit in the reservoir and drink tube for about 30 minutes.
Wash the reservoir with hot water and mild soap. Be sure to completely rinse away the cleaning solution in the reservoir and drink tube before using again. You can also use CamelBak brushes from our Cleaning Kit to scrub your reservoir and drink tube. Brushes are the best way to ensure you are scrubbing all of the areas of the reservoir clean.
Once the reservoir is clean, be sure to air dry overnight so no moisture is trapped inside, which can cause mold to grow.
These steps will make your reservoir safe for use. If there are still spots left behind, these are permanent mold stains that may not be removable. However, your reservoir is still safe and usable after you’ve cleaned it.