CamelBak Eddy+ (Plus) Kids 350ML Vacuum Insulated Stainless Steel Bottle

Keep their water colder, longer! Eddy+ Kids vacuum insulated stainless steel water bottle is durable, spill-proof when open, and leak-proof when closed. It features a comfortable carry handle and is easy to use. No tipping – just flip, bite, and sip. Easy to clean and BPA, BPS, and BPF free. Recommended for ages 3+.

(More designs also available in Eddy Kids Plus+ Tritan Renew,  Eddy Kids Plus+ Insulated Tritan Renew and Eddy+ Kids 400ml Vacuum Insulated Stainless Steel )

Features:

• Flip, Bite, Sip: Drink through a straw

• Vacuum Insulated: Double wall vacuum insulated to maintain temperature

• Durable: 18/8 Stainless steel

• Leak-Proof: Leak-proof when closed, spill-proof when open

• Easy To Carry: Comfortable carry handle

• Stays Dry: Sweat-proof insulation

• Easy to Clean: Cap top-rack dishwasher safe. Hand wash stainless steel vessel

• Drink Clean: BPA, BPS, and BPF free

• Compatible Caps: Vessel compatible with Chute® Mag cap, and Carry Cap

• 10 Hours Cold

• Ages 3+

• CamelBak Got Your Bak Guarantee: If we built it, we'll Bak it with our lifetime guarantee.

Product Details:

Series: Camelbak : Eddy+
Type of Design: Flowerchild Sloth, Magic Unicorns, School of Sharks
Primary Material: Stainless Steel
Length: 16.5 cm
Width: 7.4 cm
Weight: 0.264 kg
Size in Millilitres: 350

CLEANING THE EDDY+ KIDS BOTTLE
We can’t offer up the bottle cleaning equivalent to the five-second rule, you just gotta do it. It won’t take long, and your kids will be eternally grateful.

We recommend first removing your one-piece bite valve and straw for cleaning. It’s easy to do. (Yes, it looks like a lot of steps here, but it really is easy):

• Flip the stem to the open position by pulling on stem tab

• Turn cap over and pull out the straw

• Grab the flat finger tab on the base of the Big Bite Valve under the cap

• In one firm motion, pull the Big Bite Valve component out of the cap

• Clean the bite valve and cap by hand or in the top rack of a dishwasher.

If you use a dishwasher, a top-rack basket for small parts is ideal, and it’s good to avoid high-heat settings like 'sanitary clean' or 'heat boost' which may distort plastic components.

If you clean by hand, use warm, soapy water.

If you like to use a bottle brush, make sure it doesn't have exposed metal edges that could cut the silicone, then insert the brush into the open end at the base of the valve. We don't recommend forcing a brush of any kind through the Big Bite Valve slit (where you drink from) as this could damage the sealing surfaces of the Big Bite Valve.

To re-insert the bite valve back into the cap:

• Flip the stem collar (the component the bite valve passed through originally) to the open position. You should be able to look through both the opening in the cap and the opening in the collar

• Turn the cap over and orient the bite valve so the finger tab points towards the back of the cap (where the handle loop is)

• Insert the tip of the bite valve through the cap and the collar until the end of the Big Bite Valve peeks through the outer end of the collar

• Turn the cap over and grab the end of the Big Bite Valve and pull through until it sits in the grooves incorporated into the collar. If you pull the Big Bite Valve too far out these grooves will be visible. Just press the valve back down until these grooves are seated

• Turn the cap over and press on the base of the valve to make sure it is seated

• Insert the straw (either end it doesn't matter) into the hole in the valve base. Don't over-insert the straw just until you feel resistance

HOW DO I PUT THE BIG BITE VALVE BACK IN THE CAP?

• Follow these instructions to re-insert the Big Bite Valve component :
• Flip the stem collar (the component the bite valve passed through originally) to the open position. You should be able to look through both the opening in the cap and the opening in the collar.
• Turn the cap over and orient the bite valve so the finger tab points towards the back of the cap (where the handle loop is). Insert the tip of the bite valve through the cap and the collar until the end of the Big Bite Valve peeks through the outer end of the collar.
• Turn the cap over and grab the end of the Big Bite Valve and pull through until it sits in the grooves incorporated into the collar. If you pull the Big Bite Valve too far out these grooves will be visible. Just press the valve back down until these grooves are seated.
• Turn the cap over and press on the base of the valve to make sure it is seated.
• Insert the straw (either end, it doesn’t matter) into the hole in the valve base. Don’t over-insert the straw, just until you feel resistance.

CAN I USE A BOTTLE BRUSH ON THE BIG BITE VALVE?
Yes. The Big Bite Valve is made from tough silicone material that can be cleaned with a bottle brush similar to those designed for baby bottle nipples. Make sure the brush doesn’t have exposed metal edges that could cut the silicone. Then insert the brush into the open end at the base of the valve. We don’t recommend forcing a brush of any kind through the Big Bite Valve slit (where you drink from) as this could damage the sealing surfaces of the Big Bite Valve.

CAN I USE CARBONATED BEVERAGES?

We do not recommend the use of carbonated beverages in the CamelBak Kids’ Bottle. Because of the spill-proof sealed construction of the bottle, carbonated beverages can cause pressure build-up that while not dangerous, can result in an experience like opening a shaken-up can of soda. To use with carbonated beverages, we recommend that you remove the straw and drink using the “tip and sip” method like an ordinary sippy cup.

CAN I FREEZE THE BOTTLE?
You can freeze the bottle but make sure :

• The bottle is not completely full when you do this (we recommend only 3/4 full to allow for expansion of the water as it freezes to ice).
• The bottle is right side up

We also recommend that the bite valve stem NOT be flipped up or down if there is any frozen water in the tube. Wait until thawed.

CAN I USE THE CAMELBAK EDDY+ KIDS BOTTLE IN HIGH-ALTITUDE/ LOW-PRESSURE ENVIRONMENTS? (I.E. AIRPLANES, MOUNTAIN ALTITUDES, ETC)
Yes, but with extra care because pressure can force liquid out through the straw. Always keep the bottle right side up and the bite valve in the closed position. Remove the straw for additional protection. Expect a bit of “spurt” during the first sip.