CamelBak Eddy+ 600ML Vacuum Insulated Stainless Steel Bottle

Flip, bite, and sip even more with the redesigned Eddy + bottle! The improved bite valve design delivers 25% more flow. The universal cap is leak-proof when closed and spill-proof when open, features an easy carry handle, and is compatible with Chute Mag and Hot Cap vessels. Double-wall vacuum insulation keeps drinks cold. Strong and durable stainless steel with powder coat finish, easy to clean.

Features:

• 25% More Flow Per Sip: Flip open the bite valve and sip

• Leak-proof when closed, spill-proof when open

• Double-wall vacuum insulated to maintain temperature

• Stays Dry: Sweat-proof insulation

• Easy carry handle

• Easy to Clean: Cap dishwasher safe Hand wash stainless steel vessel

• Universal Cap: Compatible with Chute Mag and Hot Cap vessels

• Drink Clean: BPA, BPS, and BPF free

Product Details:

Manufacturer Colour: Dusk Blue, Jet, Navy, White, Wild Strawberry
Material: Stainless Steel
Weight: 0.33kg
Length: 26 cm
Width: 10.5 cm
Size in Millilitres: 600

CLEANING THE EDDY+ STAINLESS
The eddy Stainless bottle can be easily cleaned with a bottle brush using warm water and mild soap.

Cleaning the lid :
The bite valve, straw and lid can be cleaned in the top rack of the dishwasher or by hand with warm, soapy water. Pull off the bite valve and straw from the cap. If you like to use a bottle brush, we don’t recommend forcing a brush through the Bite Valve slit. If you have the brush kit, run the small brush through the straw. For a deeper cleaning, add a drop of mild soap or tablespoon of bleach to a clean glass jar filled with water. Drop the bite valve, straw and cap into the solution, and tightly close the jar’s lid. Shake the mixture around for 30 seconds, and then let the parts soak for about 15 minutes. Rinse and shake dry.

To re-assemble the lid :
Flip the stem collar (the component the bite valve attached to originally) to the open position. Orient the bite valve so the finger tab points towards the front of the cap. Push the bite valve firmly onto the stem collar. Press the straw back into place on the bottom of the lid. Ensure the straw covers the notches completely.